c-map.co.uk Just another WordPress site

30Sep/130

How to make candles

 

How to make candles

Candle Making is fun and makes a great gift.

Decide what kind of wax you want to use to make your candle. There are several different kinds of wax to choose from. One pound of paraffin wax by weight will equal approximately 20 oz of liquid melted wax. One pound of soy wax will equal approximately 18 oz of liquid when melted. One pound of beeswax by weight will equal approximately 16 oz of liquid when melted.

Put together a double boiler similar to one you might use while cooking food. You cannot put candle wax directly on heat. It must be melted slowly or it may catch fire or evaporate. Fill a large pot or pan halfway with water. Place a smaller pot or pan in the larger one. This smaller pot is the one you will melt the wax in. Keep in mind that wax can be difficult to clean--you may want to purchase a cheap, heat-safe pot that you designate specifically for making candles.

Cut or shred you wax into chunks or shavings. Smaller chunks of wax melt better than larger chunks. By using smaller pieces, you will also ensure that the wax melts at an even rate.

Place the wax chunks or shavings in the smaller pot or pan. Turn the heat to high so that the water boils. The boiling water will slowly melt the wax.

Use a thermometer to keep an eye on the temperature of the wax. You can purchase candy or candle thermometers at a cooking or craft store. If you do not have a candy thermometer, you can also use a meat thermometer. Just remember that wax can be hard to remove.

  • Paraffin wax should be melted until it reaches between 122 and 140°F (50 and 60°C).
  • Soy wax should be melted until it reaches between 170 and 180 degrees (76.6 and 82.2°C).
  • Beeswax should be melted until it reaches roughly 145 degrees (62.7°C). You can go a little bit higher but try not to exceed 175 degrees (79.4°C).
  • Old candles should be melted at around 185 degrees (85°C). Remove the old wicks with tongs.

Add scent to your melted wax. The scent you choose is up to you. Scents such as essential oils can be purchased at your local craft store. It is best to read the bottle’s directions rather than base the amount you put in on how strongly it smells after the scent has already been added. Stir well.

Place a wick in the center of the candle mold. The wick should be in the center of the candle mold with about two inches sticking out of the candle. You can adhere the wick to the bottom of your tin using double-stick adhesive. To keep the wick in place, loop the end that will be out of the wax around the center of a pen or pencil. Rest the pen across the top of the mold you will be pouring your wax into. Make sure the wick hangs down straight into the center of the mold.

  • You can also use a long clip if you have one. Clip the wick so that it is in the center of the mold. The clip has to be large enough to rest across the entire mold.
  1. Prepare your molds. You can use tins, mason jars, old teacups, really any sort of container that you know can withstand heat. Metal tins are generally the safest way to go but as long as you know your container can stand up to heat, you can really use whatever you like. Place them on a flat surface in your protected workspace (such as on a cookie sheet or a cutting board.)
  2. 2

    Pour the melted wax into the mold. Pour slowly so that it does not spill over. Make sure not to knock the wick out of the mold accidentally. You are the judge of how full you want your molds to be. Beeswax will shrink a little once it has cooled so keep that in mind when pouring it into your molds.

  3. 3

    Cool the wax. It is best to cool them for a full 24 hours if possible. The longer you let them cool, the better they will be.